User guide

Check tools, wand and hose are
clear of blockages.
A To remove the hose, rotate
base of hose downwards until
it clicks, then twist away from
the machine.
B Squeeze release catches to
remove the airway inspection
and check inside.
C Pull the top end of the tube
away from machine and
check inside.
D Undo coloured soleplate
fasteners with a coin.
E Rotate endcaps to remove.
F Pull out brushbar sections.
G Cut out debris avoiding bristles.
8 Clearing blockages
IMPORTANT
• If any part of the machine
becomes blocked, the machine
will automatically shut off.
Unplug machine and clear
blockage before restarting.
• Please ensure machine is
upright before attempting to
remove hose or airway
inspection ports.
• Refit all parts of the machine
securely before using it.
A
E
G
F
D
B
C
A
C
B
D
Maintaining Mini turbine head
A Undo fasteners and remove
soleplate.
B Remove brushbars and
debris. When re-assembling,
ensure brushbar arrows
match those on central
support
C and slider is set
as shown
D.