OPERATING MANUAL ASSEMBLY Remote control docks magnetically.
Dyson customer care THANK YOU FOR CHOOSING TO BUY A DYSON APPLIANCE After registering your free 2 year guarantee, your Dyson appliance will be covered for parts and labour for 2 years from the date of purchase, subject to the terms of the guarantee. If you have any questions about your Dyson appliance, call the Dyson Helpline with your serial number and details of where/when you bought the appliance. Most questions can be solved over the phone by one of our trained Dyson Helpline staff.
IMPORTANT SAFETY INSTRUCTIONS BEFORE USING THIS APPLIANCE READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS IN THIS MANUAL AND ON THE APPLIANCE When using an electrical appliance, basic precautions should always be followed, including the following: WARNING THE FAN AND THE REMOTE CONTROL BOTH CONTAIN MAGNETS. 1. Pacemakers and defibrillators may be affected by strong magnetic fields.
14. Do not handle any part of the plug or appliance with wet hands. 15. Do not use with a damaged cable or plug. If the supply cable is damaged it must be replaced by Dyson, its service agent or similarly qualified person in order to avoid a hazard. 16. Do not unplug by pulling on the cable. To unplug, grasp the plug, not the cable. 17. Do not stretch the cable or place the cable under strain. Keep cable away from heated surfaces. 18. Do not route the cable under furniture or appliances.
Power Each time the heating mode is selected, it conducts a short calibration cycle. Airflow will be automatically controlled during this cycle. Once the calibration cycle is complete, it will revert to the selected airflow speed. On first use, the appliance will default to a temperature 3°C higher than the detected room temperature. Thereafter, the appliance will remember the last target temperature set. Select the desired room temperature.
Sleep timer Tilt function To set the sleep timer, press and hold the timer button to select the desired time. When time reaches zero, the appliance will go into standby mode. To cancel, reduce the time until two dashes appear. Diffused and personal heating modes Diffused mode Press the wide angle button to change from personal heating to whole room heating. Heating and cool modes work in this mode.
Clearing blockages Ensure the appliance is unplugged and has been allowed to cool. Look for blockages in the air inlet holes and in the small aperture inside the air loop amplifier. Use a soft brush to remove debris. CAUTION: hot when in use Cleaning Unplug from the mains electricity supply. Allow to cool for 1 to 2 hours before cleaning if the appliance has been in use. To clean, wipe with a dry or damp cloth. Do not use detergents or polishes. Battery replacement Battery type CR 2032.
• • • • • • • • • • • • • • • • • • • • • • • • USING YOUR DYSON APPLIANCE Dyson customer care Please read the ‘Important Safety Instructions’ in this Dyson Operating Manual before proceeding. THANK YOU FOR CHOOSING TO BUY A DYSON APPLIANCE After registering your free 2 year guarantee, your Dyson appliance will be covered for parts and labour for 2 years from the date of purchase, subject to the terms of the guarantee.
Dyson Customer Care If you have a question about your Dyson appliance, call the Dyson Customer Care Helpline with your serial number and details of where and when you bought the appliance, or contact us via the Dyson website. DYSON CONTACT DETAILS UK: Website: www.dyson.co.uk/support Dyson Helpline: 0800 298 0298 Email: askdyson@dyson.co.uk Address: Dyson Ltd, Tetbury Hill, Malmesbury, Wiltshire, SN16 0RP ROI: Website: www.dyson.ie/support Dyson Helpline: 01 475 7109 Email: askdyson@dyson.co.
GUARANTEE FORM Serial number Date of purchase Title / / Country of purchase UK ROI Surname First name Address Postcode e-mail Telephone Mobile As a Dyson fan owner, you can hear about Dyson inventions, services and products before anyone else. If it’s okay to contact you, please let us know how we may do this. We sometimes ask other companies (such as market researchers) to contact owners on our behalf. We do this to get feedback on ideas or ask you to try new products and services.
