User Guide

Clearing blockagesCleaning
Control
4
Attach the remote
control to the top of
the appliance with the
buttons facing down.
Carefully hold the base and the
top of the air loop amplifier. Tilt
forward or backward for the
required airflow angle.
Standby ON/OFF
To operate, point the
remote control toward
the front of the base.
Select a high flow of air.
Select a low flow of air.
Standby
ON/OFF
Airflow control
Oscillation
ON/OFF
Sleep timer
To set the sleep timer, select the desired time.
When time reaches zero, the appliance will
go into standby mode. To cancel, reduce the
time until two dashes appear.
To clean, wipe with a dry
or damp cloth.
Do not use detergents
or polishes to clean
the appliance.
Look for blockages
in the air inlet holes.
Use a soft brush to
remove debris.
Look for blockages in the
small aperture inside the
loop amplifier. Use a soft
brush to remove debris.
11/7/13 12:00 PM C61415_AM06-10_OPMAN_UK_61415.indd_15_4c0s