Technical Specifications

TECHNICAL SPECIFICATION

SIDE ELEVATIONREAR ELEVATION

Fixing

locations

(4)

Fixing

locations

(4)

See table for recommended

mounting heights

Side cable

entry point

Side cable

entry point

Rear cable

entry point

All dimensions shown in mm (+/-5mm)

Recommended installation heights from floor

Male

X 1324mm Y 1300mm Z 930mm

Female X 1289mm Y 1265mm Z 895mm

Child or disabled X 1074mm Y 1050mm Z 680mm

Child 5-8 X 952mm Y 928mm Z 558mm

Child 8-11 X 1052mm Y 1028mm Z 658mm

Child 11-14 X 1132mm Y 110 8m m Z 738mm

Machine dimensions

Height 394mm Width 234mm Depth 100mm

Minimum clearance

220mm clearance either side and 30mm above machine.

Cable entry point from floor

Male

1089mm

Female 1054mm

Child or disabled 839mm

Child 5-8 717m m

Child 8-11 817mm

Child 11-14 897mm

FLOOR

For further information please contact Dyson.

0800 345 7788 (UK) 01-401-8300 (IE)

www.dysonairblade.com

PAGE 1
Technical specification REAR ELEVATION SIDE ELEVATION Fixing locations (4) Rear cable entry point Side cable entry point Side cable entry point Fixing locations (4) See table for recommended mounting heights All dimensions shown in mm (+/-5mm) Floor Recommended installation heights from floor Minimum clearance Male X 1324mm Y 1300mm Z 930mm 220mm clearance either side and 30mm above machine.
PAGE 2
Electrical Input voltage/Frequency: 220-253V 50 Hz Rated power: 1600 W Motor type: Dyson digital motor – brushless DC Motor Motor switching rate: 6,000 per second Motor speed: 90,000 rpm Operating temperature range: 0°– 40°C Heater type: None Standby power consumption: Less than 0.5 W Construction Casing construction: Polycarbonate casing Antibacterial coating type: AB08 (Sprayed nickel) contains antibacterial additive in paint. AB08 (White) contains antibacterial moulded additive.