Use and Care Manual

11
10
AUTO
Controlling the
humidity manually
Increase target humidity.
30 to 70%
Decrease target humidity.
70 to 30%
The machine will not mist
unless the target humidity
setting is above the current
room humidity level.
Automatic Mode
Comfortable humidity is
automatically selected by
the machine.
Airflow
Increase airflow.
1 to 10
Decrease airflow.
10 to 1
Fan/ humidity toggle
ON/ OFF switches between
humidifier and fan modes.
Control with airflow and
timer buttons.
On/off
Sleep timer
To set the sleep timer, press
and hold the timer button
to select the desired time
(between 15 minutes and
9 hours).
To cancel the sleep timer,
press and hold until two
dashes appear.
Humidity percentage
How to use
When animation sequence shows, the tank is empty.
Unplug the machine and push the button to unlock.
Lift the loop amplifier away from tank, then tank away
from base.
1
3
2
Switch ‘ON’: the water treatment procedure starts.
After 3 minutes the machine will start to humidify.
Remove the cap and fill tank (no other part) to the top
with cold tap water. Replace the cap, tank and loop
amplifier. Use the handle for easier handling.
%
A
Refilling the tank
Blue light indicates that the AM10 is
in humidity mode.
White light indicates that the AM10 is
in fan mode.
On/off
Press and hold the power button on
the machine to adjust the humidity
setting.
Automatic mode