User manual Assembling your machine click click click Quick start Power modes Your machine has three power modes for different tasks. Change cleaning modes quickly using a single button. Eco EcoEco Auto Auto Auto Eco MedMed Med Med Auto Maximum run time for longer cleans. The optimum balance to clean all floors. Attach your High torque cleaner head to activate Auto/Med mode, which automatically adapts power between carpets and hard floors.
Thank you for choosing to buy a Dyson machine Activating your guarantee We don’t stop caring about our machines once they’re yours. Even after your warranty has ended, we’ll still be on hand to help. After activating your free two-year guarantee, your Dyson cord-free vacuum will be covered for parts and labour (excluding filters) for two years from the date of purchase, subject to the terms of the guarantee. Free Dyson parts and labour Hassle-free replacement Expert advice. Seven days a week.
IMPORTANT SAFETY INSTRUCTIONS 7. If the appliance is not working as it should, if it has received a sharp blow, if it has been dropped, damaged, left outdoors, or dropped into water, do not use and contact the Dyson Helpline. 8. Contact the Dyson Helpline when a service or repair is required. Do not disassemble the appliance as incorrect reassembly may result in an electric shock or fire. BEFORE USING THIS APPLIANCE READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS IN THE USER MANUAL AND ON THE APPLIANCE.
20. Do not install, charge or use this appliance outdoors, in a bathroom or within 3 metres (10 feet) of a pool. Do not use on wet surfaces and do not expose to moisture, rain or snow. • 21. When removing or replacing a motorised brush bar, be careful not to pull the power trigger until the cleaner head has been reassembled. • • Inhalation – can cause respiratory irritation. Expose to fresh air and seek medical advice. Eye contact – can cause irritation.
The screen Eco Eco Auto oost Auto Med Med Eco Boost Auto Eco Changing language Auto Low run time Espanol English Med English On Low On Exit Off 100% 4:50 Med English Exit Espanol English selected English Espanol Tap to scroll through the settings menu. Select the 'Alerts' option. Scroll to select on or off. Hold the Selection button until the countdown ends and a tick appears on the screen. To cancel your selection, release the button during the countdown.
Charging and storing your machine Where you have additional batteries, we recommend that you alternate the batteries to maintain even performance. It's important to fully charge your new machine before using it for the first time, and after every clean. This is because the battery and monitoring system's algorithm 'learns' over time, and fully charging your machine helps it to more accurately calculate and display remaining run time. Eco 3-4.
Looking for blockages 1 2 1 1 2 1 1 2 2 3 clik 1 4 3 1 2 1 3 2 4 3 1 4 2 3 2 4 4 3 clik 3 2 3 4 4 4 4 5 6 click clik clik Close the clear bin by pushing the bin base clik upwards until the clear bin and bin base click into place.
1 4 4 Cleaning the filter 1 1 2 3 1 2 3 4 2 2 3 clik 4 4 3 4 5 6 clik clik High torque cleaner head maintenance clik clik 2 4 3 clik 3 2 1 1 9
Soft roller cleaner head maintenance – washing the brush bars 1 1 2 3 2 4 5 6 click 1 2 click 7 8 2 1 10
Soft roller cleaner head maintenance – clearing blockages 1 1 2 3 2 4 5 2 1 Additional information Please read the ‘Important safety instructions’ in the Dyson User manual before proceeding. Installing your docking station • Unpack the docking station, charger and installation leaflet. • Choose a suitable location for the docking station and make sure there is no pipework (gas, water or air), electrical cables, wires or ductwork directly behind the mounting location.
• • • • • Beware of sharp objects when checking for blockages. Clearing blockages is not covered by your guarantee. To check for blockages in the main body of your machine, remove the clear bin following the instructions in the 'Emptying your clear bin' section and remove any blockage. If you can't clear an obstruction from the cleaner head, you may need to remove the brush bar. Use a coin to unlock the fastener, slide the brush bar out of the cleaner head and remove the obstruction.
Dyson customer care If you have a question about your Dyson machine, contact us via the Dyson website or call the Dyson Helpline with your serial number and details of where and when you bought the machine. GB Dyson customer care askdyson@dyson.co.uk 0800 298 0298 Dyson Technology Limited, Tetbury Hill, Malmesbury, Wiltshire, SN16 0RP IE JN.105695 PN.294225-05-02 17.12.19 Dyson customer care askdyson@dyson.
GUARANTEE FORM Serial number / Date of purchase Title / Country of purchase UK ROI Surname First name Address Postcode email Telephone Mobile As a Dyson appliance owner, you can hear about Dyson inventions, services and products before anyone else. If it’s okay to contact you, please let us know how we may do this. We sometimes ask other companies (such as market researchers) to contact owners on our behalf. We do this to get feedback on ideas or ask you to try new products and services.
