Operation Manual

DYON OMEGA 22 v2
34
EN
8.3.3 My Movie
My Movie can play most of MPEG2/4 files. It displays the played file name at the top left
corner , and use the info key to get the current playing time and total time information while
playing. Press<Info>button to select device if an external USB hub connected while
browsing, and to show the control info bar while playing. Press<Up/Down/Left/Right/OK> to
select folders and files during browsing, and to switch next/previous file or adjust the volume
while playing.
Press<OK>button to select a file to play.
Press<RED>button to play or pause while playing. Press<GREEN>button to play the frame one
by one while palying.
Press<YELLOW>button to set fast backward speed as x2, x4, x8, x16, x32, Normal.
Press<BLUE>button to set fast forward speed as x2, x4, x8, x16, x32, Normal.
Key Description
Info select device if an external USB hub is connected
////OK browse folders and files
/ switch to the next/previous file
/ adjust volume while playing
OK start play
Rot Play/Pause
Grün play the frame one by one while palying
Gelb Fast rewind
Blau Fast forward
8.3.4 My Record
My Record make user can view the program that has been recorded, or configure the options
for recording. Please notice that the File System supported is FAT and FAT32. In Recorded List
menu, user can view or delete the recorded program. In Recording Device menu, user can
select different storage media or different partition in one storage media for recording. In
Recording Preference menu, user can change the mode of Time Shift, One Button
Recording, and the length of default recording period. Please notice that Time Shift Size is
calculated
automatically according to the current storage media or current partition, it can't be modified.
Time Shift
:
Auto: this option will start Time Shift recording automatically for program being viewed. Pause:
this option will start Time Shift recording only after PAUSE key is pressed by user. OFF: this option
will disable Time Shift recording.
One Button Recording:
ON: this option will start recording the program being viewed directly after RECORD key is
pressed.
OFF: this option will enable user to pre-set the length of recording after RECORD key is
pressed.
Press <Up/Down/Left/Right> for navigation in the menu.
Press <OK> to select or modification confirm. Press <EXIT> to exit the
current menu.
Press <RED/GREEN/YELLOW/BLUE> for special function indicated in the menu.