Operation Manual

DYON OMEGA 22 v2

Press ◄► to select the function icon, press OK button to confirm the function. Press ▼or EXIT button to

exit the control bar.

NOTE: You can adjust the audio track, or program in the Info menu while Playing the video file. Choose

the Info icon and press OK can display the Info MENU.

4.7 Connecting to PC

The unit can be connected to PC (personal computer) via the VGA cable.

Follow the figure below to connect:

1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit and connect

the other end to the PC.

2. Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit and

connect the other end to the PC audio output jack.

3. Connect the power cord.

4. Power on the TV set and switch to PC mode (VGA) using the SOURCE key.

5. Power on the PC.

6. Set the PC video resolution to match that of the television (typically 1920x1080@60Hz).

NOTE: It is very important to follow this steps exactly!

4.8 Connecting to TV-Signal Input

Connect the TV signal cable (the antenna cable, for example) to the Antenna Input Jack on the back of the

unit so that you can receive television programmes.