Installation Guide User Manual

SV-ADAHRS-200/201 Installation and Configuration

5-2 SkyView System Installation Guide - Revision S

Figure 24 – Suggested SV-ADAHRS-200/201 Installation Procedure

Physical Installation

As previously mentioned in the System Planning Section, there are no module-to-

module proximity requirements when installing multiple SV-ADAHRS-200/201

modules in an aircraft. For example, one SV-ADAHRS-200/201 may be installed on

top of another SV-ADAHRS-200/201 module. Other installation location

requirements still apply.

The diagram below shows the important mounting dimensions of the ADAHRS module with

electronic and pneumatic connections. Note that the figure applies to both the SV-ADAHRS-200

and SV-ADAHRS-201 modules.

Figure 25 – SV-ADAHRS-200/201 Mounting Dimensions with Electronic and Pneumatic Connections

Additional mounting location, orientation, and other installation requirements are described in

the System Planning section earlier in this manual. Please review this section when physically

installing your with SV-ADAHRS-200/201 module(s).

OAT

Connecto