Installation Guide User Manual

Autopilot Servo Installation, Configuration, and Calibration
10-8 SkyView System Installation Guide - Revision S
Figure 62 – Servo Range of Motion Limiting Bracket, Front
Figure 63 – Servo Range of Motion Limiting Bracket - Isometric
The bushings and other mechanical components in Dynon Avionics Autopilot
servos are self-lubricating and should not be additionally lubricated.
Minimizing Free Play
It is important that the autopilot servo have positive control of the aircraft control surface
when engaged. If there is free play or “slop” anywhere between the servo, the linkages that
connect it to the aircraft, and the aircraft control surface, the autopilot’s performance may
suffer. To test for free play:
 Immobilize the autopilot servo arm. This can be accomplished by manually restraining
the autopilot arm/capstan, or by engaging the autopilot on the ground in servo test