Autopilot Servo Installation Guide RV10 Pitch for Linear Actuator This product is not approved for installation in type certificated aircraft Document 101046-007, Revision E June, 2013 Copyright © 2009-2013 by Dynon Avionics, Inc.
DYNON AVIONICS Contact Information Dynon Avionics, Inc. 19825 141st Place NE Woodinville, WA 98072 Phone: (425) 402-0433 - 8:00 AM – 5:00 PM (Pacific Time) Monday – Friday Dynon Technical Support available 7:00 AM–4:00 PM (Pacific Time) Monday – Friday Email: support@dynonavionics.com Fax: (425) 984-1751 Dynon Avionics offers online sales, extensive support, and frequently updated information on its products via its Internet sites: www.dynonavionics.com –Dynon Avionics primary web site; including: docs.
DYNON AVIONICS INSTRUCTIONS - RV-10 PITCH KIT FOR LINEAR ACTUATOR Dynon Part # QTY Part Description 100836-000 1 Large Male Rod End 100973-002 1 RV10 Pitch Bracket for Linear Actuator 100975-002 1 AN315-4R Jam Nut 100976-011 1 AN365-1032A Nylon Insert Locknut 100977-000 1 AN970-3 Large Flat Washer 100978-003 3 AN960-10 Small Flat Washer 100979-002 4 MS35333-39 #10 Internal Star Washer 100981-000 4 AN3H-3A Bolt – 3/8” 100981-009 1 AN3H-14A Bolt – 1 ½” 100982-001 1 Aluminum Spacer –
DYNON AVIONICS Wiring Overview The following diagram provides an overview of the autopilot-specific wiring installation. For the complete set of wiring and configuration instructions, please see the latest Installation Guide for your Dynon EFIS product. For a SkyView system please reference the Autopilot Servo Installation, Configuration, and Calibration chapter of your SkyView System Installation guide.
DYNON AVIONICS Servo Specifications Total SV42T weight as shipped is 3.0 lbs (1.36 kg). Maximum linear travel is 3.5 in (8.9 cm). Maximum force @ 100% autopilot torque setting is 65 lbs. Use the following dimensions (in inches) for reference when planning and implementing your installation.
DYNON AVIONICS The autopilot safety shear screw should NEVER be removed or adjusted during this operation. If the shear screw has broken and needs replacement, there is specific documentation available for this purpose at http://docs.dynonavionics.com. Fig 1 Neglecting to properly install and/or use Dynon autopilot hardware may result in failures which could cause loss of aircraft control resulting in aircraft damage, personal injury or death.
DYNON AVIONICS Mounting Drawings The following pages provide detailed views of the mounting and assembly of the servo and this kit.
DYNON AVIONICS Fig 3 Servo Mounting Instructions – RV-10 Pitch Kit with Linear Actuator 101046-007 REV E 7
DYNON AVIONICS Fig 4 Servo Mounting Instructions – RV-10 Pitch Kit with Linear Actuator 101046-007 REV E 8
