Installation Guide Owner manual

EMS Configuration

enter these values according to the ones printed on your manifold pressure sensor, provided by

GRT.

Oil Pressure

Select the alarm mode and the analog bar thresholds

as described in Alarm and Color Threshold

Configuration on page 5-2. If the oil pressure

transducer has been installed, set the DISPLAY

parameter to ON, otherwise, set it to OFF. Change

the SENSOR TYPE to the correct number using the

sensor type table.

Sensor

Type

Oil Pressure Sensor

Dynon P/N 100411-002 or

Rotax 912 pre-installed

(prior to mid-2008)

2 GRT HPS-01

3 Jabiru pre-installed

EMS-D10 Installation Guide 5-9

Rotax P/N 956413 (mid-

2008 and later

Sensor

Type

Oil Temperature

Select the alarm mode and the analog bar

thresholds as described in Alarm and Color

Threshold Configuration on page 5-2. If the

oil tem

perature sensor has been installed, set

the DISPLAY parameter to ON, otherwise,

set it to OFF. Change the SENSOR TYPE to

the correct number using the sensor type

table.

Oil Temp Sensor

1 Dynon P/N 100409-001

2 Dynon P/N 100409-000

3 GRT FT-LC-01

4 Rotax pre-installed

5 Jabiru pre-installed

6 Chevrolet LS7 pre-installed