Users Guide
Autopilot Operation
7-4 EFIS-D10A Pilot’s User Guide
AP Status Indicator Modes
AP State Roll Display Pitch Display
Status: Altitude Hold ug as target altitude Mode; AP uses Altitude B
N/A
ALT
Warning: Servo slipping
Mode ellow
background
Mode ellow
background
display with y display with y
AP Status Indicator Errors
AP State Roll Display Pitch Display
Warning: Servo has been c sted (See: SETUP > AP >
TST (red text) TST (red text)
alibrated but not te
SERVO TEST)
Warning: Airspeed outsid eed. See: SETUP > AP >
PITCH SERVO.
e min or max airsp
SPD (red text)
SPD (red text)
Warning: Servo e d. Check DSAB
ERR (r
ed text)
ERR (red text)
rror condition detected, or servo not foun
configuration, wiring, and servo power.
A he above error states cannot be engaged.
PS data. If an error is
ny axis that is in any of t
FAILURE MODES
The EFIS continuously monitors the overall operation of the AP as well as the state of incoming G
detected, the subsystem where the error has occurred is restricted and reported. Some examples:
If an error in the Pitch servo is detected, the AP reports an error in the Pitch servo, but continues operation of the
Roll servo.