Instruction Manual

D10 and D100 Series Conversion To SkyView Guide – Rev D Page 39

HS34

Male

Connector

Pin No.

HS34 Male Connector

Function

Notes for conversion to

SV-HARNESS-D37

and

SV-EMS-220 Main Sensor Harness

VOICE AUDIO

OUTPUT (8V peak-

peak)

If this wire was used for audio output, reroute this wire to SkyView

display. Because HS34 Audio was mono, connect this wire to both

SkyView Display

PIN 13 – AUDIO OUTPUT LEFT

and

PIN 31 – AUDIO OUTPUT RIGHT

If a 10K potentiometer was installed on this wire to adjust volume,

remove it (SkyView has internal volume adjustment).