Owner manual

Proportional Air Brake Installation Guide

PROPORTIONAL AIR BRAKE

Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

INSTALLATION

This section describes the procedures to remove the standard air brake system, install

the proportional air brake system, and wire the Breakout board.

PARTS LIST

The following table lists all of the parts included in the Proportional Air Brake

Installation kit. Check your kit against the parts listed to make sure you have received

all of the parts. If any part is missing, contact Dynojet Technical Support.

Figure 1: Proportional Air Brake Components

part number description quantity

21619200 Temperature Sensor Bracket 1

31614100 DIN Rail 1

36560834 Screw, 1/4"-20 x 1/2", Button-head 4

44997101 Temperature Sensor 1

64111001 Prop Air Regulator Sub Assembly 1

64111002 Control Valve Sub Assembly (electronic pressure regulator, EPR) 1

prop air regulator

assembly

DIN rail

temperature sensor

bracket

screws

control valve

assembly (EPR)