Installation Guide

5 22-100

10 Plug the PCV in-line of the stock ignition coils and

wiring harness.

PCV GREEN wires go to the #1 cylinder (left).

12 Plug the PCV in-line of the stock wiring harness and

CPS.

13 Using one of the supplied Velcro strips, secure the

PCV module in the tail section.

Use the supplied alcohol swab to clean the surface

area prior to applying the Velcro.

14 Reinstall the bodywork.

Download the latest map ﬁles from our web site at

dynojet.com/tunes.

11 Unplug the stock wiring harness from the Crank

Position Sensor connector.

This connection is on the left side near the regulator/

rectiﬁer.