Installation Guide

4 2022 YAMAHA R7 4 22-100

7 Unplug the stock Throttle Position Sensor (TPS)

connector.

This is a BLACK 3-pin connector on the right side of

the throttle bodies.

9 Unplug the stock wiring harness from the ignition

coils.

8 Plug the PCV in-line of the TPS and stock wiring

harness.

6 Plug the PCV in-line of the stock wiring harness and

each injector.

PCV ORANGE wires go to the #1 cylinder (left)

Stock

PCV