Installation Guide

6 02-09 YAMAHA ROAD STAR WARRIOR
INSTALLATION GUIDE
17 Plug the pair of connectors from the PC6 with
BROWN colored wires in-line of the stock Crank
Position Sensor connectors.
18 Reinstall the bike’s ECU back into its original
location.
19 Using the supplied Velcro, attach the PC6 to the
top of the ECU.
Use the alcohol swab to clean both surfaces before
attaching.
20 Reinstall the cover, fuel tank, and seats.
Download the latest map fi les from our web site at
dynojet.com/tunes.
Optional Inputs:
Speed input - WHITE/YELLOW wire of WHITE 3 pin
plug. Located under ECU (WHITE/YELLOW - BLUE -
BLUE/BLACK)
12v source for Autoune - BLUE wire of 6 pin
connector for tail light. Located under the ECU
CONNECT TO CPS
INSTALL PC6
INSTALLING THE POWER COMMANDER 6