Installation Guide

4 02-09 YAMAHA ROAD STAR WARRIOR
INSTALLATION GUIDE
7 Unplug the BLACK 4-pin connector for the fuel
injectors.
8 Unplug the BLACK 3-pin connector for the Throttle
Position Sensor.
9 Plug the connectors from the PC6 in-line of the
stock wiring harness.
UNPLUG STOCK HARNESS
CONNECT IN-LINE
10 Locate the stock ground. Follow the negative
battery cable to the frame. Remove the allen
bolt that secures the ground cable to the frame.
Reinstall the allen bolt thru the stock ground cable,
then thru the ground wire from the PC6 into the
frame.
ATTACH TO GROUND
INSTALLING THE POWER COMMANDER 6