Installation Guide

4 2007-2009 DUCATI MULTISTRADA 1100
INSTALLATION GUIDE
8 Route the PC6 wiring harness up to throttle bodies.
It is possible to install the PC6 without removing the
fuel tank and the air box, although removing them
may aid in the install.
9 Unplug the stock wiring harness from the rear fuel
injector.
10 Plug the pair of PC6 leads with YELLOW colored wires
in-line of the stock wiring harness and the rear fuel
injector.
11 Route the PC6 harness under the throttle bodies to
the right side of the bike.
12 Repeat steps 9 & 10 for the front fuel injector using
the pair of PC6 leads with the ORANGE colored wires.
13 Reinstall the left and right side panels.
Download the latest map fi les from our web site at
dynojet.com/tunes.