Manual

Compressed Air Air Fuel Ratio Module Installation and User Guide
CHAPTER 1
Air Fuel Module Installation
1-4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AIR FUEL MODULE INSTALLATION
This section describes installation procedures for the Air Fuel Ratio Module.
INSTALLING THE AIR FUEL MODULE
1 Verify the main dyno power is disconnected.
2 Turn off the main power switch on the CPU Module unplug the power cord.
3 Remove the dust cover from the existing top module.
Figure 1-1: Remove the Dust Cover
dust cover
power cord input
power switch