Manual

Air Fuel Ratio Module Installation and User Guide

CHAPTER 1

Installation

1-4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

INSTALLATION

This section describes installation procedures for the Air Fuel Ratio Module.

PARTS LIST

The following table lists all of the parts included in the Air Fuel Ratio Module

Installation kit. Check your kit against the parts listed to make sure you have received

all of the parts. If any part is missing, contact Dynojet Technical Support.

INSTALLING THE AIR FUEL MODULE

1 Turn off the main power switch on the CPU Module on the dyno electronics and

unplug the power cord.

2 Remove the dust cover from the existing top module.

Figure 1-1: Remove Dust Cover

Part Number Description Quantity

64193007

64193008

Air Pump and Filter Assembly (Domestic)

Air Pump and Filter Assembly (European)

66493002 Air Fuel Ratio Module 1

43432301 Module Tie Straps 2

48292000 Sensor 1

76950701 Cable, Air/Fuel Sensor 1

dust cover

power cord

input

power switch