Installation Guide Owner's manual

In Ground Model 200iP/250iP Motorcycle Dynamometer Installation Guide
CHAPTER 2
Cable Track Installation
2-26
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CABLE TRACK INSTALLATION
You will need the following parts:
• 134260301 Nut, 4-40, Hex (4)
• 136206141 Screw, 4-40 x 3/8", Flat-Head (6)
• 21228520 Cable Hole Cover Track Mount
• 21626217 Cable Track Mounting Bracket
• 43432150 Cable Track
1 Secure the cable hole cover track mount to the junction box using two
4-40 x 3/8-inch flat-head screws.
Figure 2-21: Install the Cable Hole Cover Track Mount
PD162
cable hole cover
track mount
junction box