Manualshelf

Upgrade Owner manual

ManualsBrandsDynojet ManualsEquipment250: Eddy Current Brake Driveline
12345678910
DRIVELINE UPGRADE INSTALLATION
Remove the Existing Connecting Arms and Couplers
Version 1 Model 250 Eddy Current Brake Driveline Upgrade Installation Guide
5
R
EMOVING
THE
E
DDY
C
URRENT
B
RAKE
1 Remove the three 3/8-inch bolts from the coupler.
2 Loosen the set screws securing the coupler.
Figure 3: Loosen the Couplers
3 Remove the four bolts and washers securing the connecting arms to the dyno.
Retain the bolts and washers. This hardware will be used to secure the new
braces.
4 Slide the eddy current brake away from the dyno.
Figure 4: Slide the Eddy Current Brake Away from the Dyno
set screws
bolts