Upgrade Owner manual

Model 250 Eddy Current Brake Driveline Upgrade Installation Guide

DRIVELINE UPGRADE INSTALLATION

Install the Driveline and Brace Upgrade

PGRADING

AND

NSTALLING

THE

OOD

1 Remove the eddy current brake hood from the dyno hood by removing the six

1/4-inch button-head screws and nuts.

2 Secure the rear hood extension to the brake and dyno hoods using four

1/4-20 x 3/4-inch button-head screws and four 1/4-20 nuts.

3 Secure the front hood extension to the brake and dyno hoods using six

1/4-20 x 3/4-inch button-head screws and six 1/4-20 nuts.

Figure 10: Install the Front and Rear Hood Extensions

rear hood

extension

front hood extension