Upgrade Owner manual

DRIVELINE UPGRADE INSTALLATION
Install the Driveline and Brace Upgrade
Version 1 Model 250 Eddy Current Brake Driveline Upgrade Installation Guide
9
3 Slide the eddy current brake up to the dyno.
4 Slide the driveline on the dyno shaft.
5 Secure the braces to the dyno using the bolts and washers removed earlier.
6 Tighten the driveline set screws. There is a set screw on each side of the driveline.
Figure 9: Secure the Eddy Current Brake to the Dyno