User Manual

DynoWare EX+ Upgrade Installation Guide
DYNOWARE EX+ UPGRADE
Parts List
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PARTS LIST
The following table lists all of the parts included in the DynoWare EX+ Upgrade
Installation kit. Check your kit against the parts listed to make sure you have received
all of the parts. If any part is missing, contact Dynojet Technical Support.
Figure 1: Components Included In the Upgrade Kit
part number description quantity
66191001, 66192001,
66193001, 66493001,
21646100
DynoWare EX+ Four Basic Modules plus Mounting Base 1 each
761900001 Power Supply 1
318110301 Power Cord, 125V, 10A 1
65291001 Breakout Board 1
327-800-001 Dyno Pickup Card 1
66954001 Dyno Pickup Card Cable (Data Acq. Cable) 1
DM104-001 Dyno Pickup Card Bracket 1
A10Z2-304A Rubber Vibration Dampener Mounts 4
36540643 #8-32 Screws 6
134490301 #8-32 Nuts 4
91114A009 #8 Lock washers 6
DE100-109S Inductive Pickup Cable 1
DE100-104N Remote Switch 1
42924090 Breakout Board to DynoWare Cable 1
42924250 DynoWare to Computer Serial Port Cable 1
DynoWare EX+
modules
power supply
pickup card
pickup card cable
DynoWare to
PC cable
Breakout board to
DynoWare cable
remote switch
screws, nuts, lock washers,
dampening mounts
inductive pickup cable
pickup card bracket
Breakout board
power cord