Maintenance Guide Manual

Maintenance Guide for Automotive Dynamometers
AUTO DYNO MAINTENANCE
4WD Attachment for Model 224 Dynos
18
ADJUSTING THE AIR MOTOR LUBRICATOR
Use the following steps to adjust the amount of oil provided by the air motor
lubricator.
1 Turn the top knob on the air motor lubricator clockwise until it shuts off the flow
of oil.
2 Back off the knob one turn counter-clockwise to start the flow of oil.
3 Adjust the knob as needed between one turn and fully on (turning counter-
clockwise) as needed for the particular environment in your dyno room.
Figure 16: 224 4WD Attachment—Adjust the Air Motor Lubricator
AD206
turn knob
clockwise to shut
off oil, back off one
turn counter-
clockwise to start
the flow of oil