Maintenance Guide Manual

AUTO DYNO MAINTENANCE
4WD Attachment for Model 224 Dynos
Version 3 Maintenance Guide for Automotive Dynamometers
17
FILLING THE AIR MOTOR LUBRICATOR
Check the air motor lubricator once per month and fill as necessary.
1 Disconnect the air before removing the lubricator bowl.
2 Shut off or disconnect the air supply to the dyno, and follow lock out procedure.
3 Press and hold the dyno in or out movement switch until you cannot hear any air
going through the movement motor.
4 Before running the Gast Air Motor, remove the lubricator bowl and fill the bowl
with oil.
Note: Use a non-detergent SAE #10 automotive engine oil (Gast Part #AD220).
Figure 15: 224 4WD Attachment—Check Air Motor Lubricator
BR
0
4
3
remove bowl and
fill to line with oil