Installation Guide User Manual

SPECIFICATIONS AND OPERATING REQUIREMENTS
Dynamometer Specifications and Requirements
Version 4 Above Ground Model 224 Automotive Dynamometer Installation Guide
1-5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DYNAMOMETER SPECIFICATIONS AND REQUIREMENTS
The following specifications and requirements will help you set up your dyno area
and verify you have the requirements necessary to operate your dyno safely.
CHASSIS SPECIFICATIONS
description specifications
Length
of frame 218.44 cm (86.00 in.)
Height
to top of frame 58.42 cm (23.00 in.)
Width
of frame 73.66 cm (29.00 in.)
including feet 89.54 cm (35.25 in.)
including brake 96.52 cm (38.00 in.)
frame and deck 165.74 cm (65.25 in.)
Weight
224 dyno/crated dyno 1588 kg (3500 pounds)/ 1905.09 kg (4200 pounds)
Drum
diameter 60.96 cm (24.00 in.)
width 205.74 cm (81.00 in.)
Frame structural steel channel and angle
Maximum Horsepower 745.58 KW (1000 HP)
Maximum Speed 322 KPH (200 MPH)
Maximum Axle Weight 1361 kg (3000 pounds)
Remote Switches remote software control