Manual

EDDY CURRENT BRAKE INSTALLATION
Eddy Current Brake Installation
Version 2 Model 224 Pit Eddy Current Brake Installation and User Guide
1-21
REPLACING THE THETA CONTROLLER FUSES
Hazardous voltage. To avoid risk of electrical shock, disconnect the battery and
unplug the dyno.
1 Remove the nine button-head screws securing the deck assembly and set aside.
2 Remove the deck assembly and set aside.
3 Gently push the fuse holder slightly inward and rotate counterclockwise. Remove
the fuse holder.
4 Replace the fuse with a fuse type listed below.
For continued protection against risk of fire, replace only with a fuse of the
same type and having the same electrical rating.
• Buss P/N BAF-25, 25A Fuse
• Fast Blow, Dynojet P/N 54212501
5 Replace the deck assembly using the nine button-head screws removed earlier.
Refer to Figure 2-10 on page 2-10.