Owner manual

CE Package Installation Guide for 224 Automotive Dynamometers
CE PACKAGE
CE Drum Guards—Above Ground
4
INSTALLING THE CE DRUM GUARDS—ABOVE GROUND
The CE Drum Guards are secured to the dyno’s cover set. The following instructions
are for the 224 above ground dyno. If you have a 224 pit dyno please refer to
“Installing the CE Drum Guards—Pit” on page 8.
1 Secure the front and rear CE drum guards to the long above ground covers using
ten 1/4-20 x 5/8" panhead screws.
Figure 2: Securing the Drum Guards to the Long Covers
2 Secure the side CE drum guards to the left and right above ground covers using
four 1/4-20 nylock nuts.
Figure 3: Securing Drum Guards to the Left/Right Covers
long cover
screw
front/rear
drum guard
left/right cover
side drum guard
nylock
nut
stud