Installation Guide Owner's manual

In Ground Model 224 4WD Automotive Dynamometer Installation Guide
CHAPTER 3
Dyno Electronics
3-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DYNO ELECTRONICS
The standard DynoWare EX+ dynamometer electronics package is comprised of four
interconnected modules: Atmospheric Sensing Module, RPM Module, Dynamometer
Input/Output Module, and the CPU Module.
Figure 3-1: Dyno Electronics
ATMOSPHERIC SENSING MODULE
The atmospheric sensing module measures absolute pressure, air temperature, and
relative humidity. These measurements are used by WinPEP to correct power and
torque measurements to standard atmospheric conditions according to a DIN, SAE, or
other formula.
LED indicator description
The green LED glows when the atmospheric sensing
module is receiving power.
The flashing amber LED indicates the module processor
is operating properly.
system expansion
connector
atmospheric
sensing module
RPM module
dynamometer
input/output module
CPU module
inductive pickup socket
25-pin socket
9-pin, RS-232 socket
9-pin, hand held
pendant
3-pin power plug