Installation Guide Owner's manual

INSTALLATION
Chain Installation
Version 3 In Ground Model 224 4WD Automotive Dynamometer Installation Guide
2-21
2 Route the chain over the top of the drive sprocket, under the idler sprockets, and
over to the rail tie assembly.
3 Secure each end of the chain to the rail tie assembly using one 1/2-13 nut.
Note: Verify the chain does not droop.
Figure 2-18: Route and Secure the Chain
chain
drive
sprocket
idler
sprocket
rail tie
assembly
nut
chain
rail tie
assembly
nut
chain-
no droop