Installation Guide User Manual

LIST OF FIGURES
Version 3 Motorcycle Dynamometer Installation Guide
v
Figure 3-35: Install the Nut Block and Front Clamp. . . . . . . . . . . . . . . . . . .3-27
Figure 3-36: Install the Screw Support Bracket. . . . . . . . . . . . . . . . . . . . . . .3-28
Figure 3-37: Install the Rotor/Taper Lock Assembly . . . . . . . . . . . . . . . . . . .3-30
Figure 3-38: Check for Run Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-30
Figure 3-39: Caliper Assembly Mounting Bolts. . . . . . . . . . . . . . . . . . . . . . .3-31
Figure 3-40: Secure the Caliper Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . .3-31
Figure 3-41: Adjust the Brake Pad Space. . . . . . . . . . . . . . . . . . . . . . . . . . . .3-32
Figure 3-42: Install the Master Cylinder and Foot Pedal . . . . . . . . . . . . . . .3-32
Figure 3-43: Install the Metal Brake Line . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-33
Figure 3-44: Install the Monitor Arm Bracket . . . . . . . . . . . . . . . . . . . . . . . .3-35
Figure 3-45: Install the Arms and Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-36
Figure 3-46: Remove the Hand Crank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-37
Figure 3-47: Remove the Flange Bearing . . . . . . . . . . . . . . . . . . . . . . . . . . .3-38
Figure 3-48: Remove the Aluminum Cover. . . . . . . . . . . . . . . . . . . . . . . . . .3-38
Figure 3-49: Install the Motor Mount Assembly . . . . . . . . . . . . . . . . . . . . . .3-39
Figure 3-50: Power Carriage Secured to Dyno . . . . . . . . . . . . . . . . . . . . . . .3-40