Installation Guide User Manual

OPTIONAL ACCESSORIES

Dual Fan

Version 3 Motorcycle Dynamometer Installation Guide

3-23

4 Flip arm A over, place the poly washer on the stud, and insert into the main

bracket from the top.

5 Flip arm B over, place the poly washer on the stud, and insert into arm A from the

bottom. Secure Arm B using the bolts, washers, and spacers removed earlier.

Note: Arm B is the only arm with a threaded stud.

6 Replace the four hand knobs removed earlier.

7 Continue with “Installing the Extension Arm Assembly” on page 3-19, “Installing

the Fan Assemblies” on page 3-20, and “Installing the Outlet Box” on page 3-21 to

complete the fan installation.

Figure 3-30: Modify the Extension Arm Assembly—New Arm Configuration

arm B

arm A

arm B

hand knob

threaded stud

main bracket