Installation Guide User Manual

Motorcycle Dynamometer Installation Guide
CHAPTER 3
Air Brake
3-8
4 Adjust the space between the brake pad and the rotor making sure the rotor is
able to spin free of contact.
Loosen the jam nut and use the adjuster nut to move the brake pads in or out.
Figure 3-12: Adjust the Brake Pad Space
INSTALLING THE AIR CYLINDER AND MASTER CYLINDER ASSEMBLY
1 With the air cylinder on the inside of the dyno frame and the mounting plate on
the outside, secure the air cylinder with the 1/2-20 x 3/4-inch bolt.
Figure 3-13: Install the Air Cylinder
jam nut
adjuster nut
bolt
air cylinder
mounting plate
cut away view of
dyno side panel