Owner manual

Step 3

Use a hammer and a transfer punch to mark the two holes for the

retaining pins. The two holes are opposite of each other and near

the corners.

Step 4

Remove the cover and drill the marks that you made with a

” bit.

Step 5

Replace the cover and line up the holes. Install the push pins

through the cover and into the dyno top deck.

You may now operate the Kart Dyno with the Motorcycle Carriage

Option.

P/N 98230100 3

Mark the two

holes here:

Install the push pins

Note: Never operate a motorcycle on the dyno with

the drum cover removed.