Owner manual

Drum Cover Installation

This manual explains the installation procedure for the drum

cover. The drum cover is necessary for the Kart / ATV Dyno when

used in conjunction with Motorcycle Carriage Option.

Step 1

Place the Drum Cover on the top deck of the dyno. It should cover

the drum that it not used during motorcycle testing.

Step 2

Use a tape measure to center the Drum Cover. Measure the front

and rear of the cover to the front and rear of the dyno frame (A).

Also, measure from the drum face (on each side) to the edge of the

Drum Cover (B).

P/N 98230100 2