Installation Guide

PC6-16077

INSTALLING THE POWER COMMANDER 6

CONNECT TO ECM

INSTALL PC6

UNPLUG ECM

1 Remove the seat. Remove the side covers. Remove

the plastic around the fuel tank.

2 Secure the PC6 module on the back side the air box

at the location shown.

Use the supplied Velcro strips to secure the module.

Clean surfaces with the alcohol swab before

attaching the Velcro.

3 Route the PC6 wiring harness forward following along

the left side frame rail.

4 Unplug the bike’s ECM.

5 Plug the PC6 wiring harness in-line of the bike’s ECM

and stock wiring harness.

6 Reinstall the bodywork and the seat.

Download the latest map ﬁ les from our web site at

dynojet.com/tunes.