Specifications

Order by phone➤
01342 826836
Order on-line➤
www.ecomcat.co.uk
Order by fax➤
01342 826771
Website➤
www.jencons.co.uk
Microplate Equipment
Robotics
Take a look at our latest products on www.ecomcat.co.uk
653
448-000
Hamilton, Microlab
®
SWAP Microplate Handling Robot
The Microlab
®
SWAP is designed for precise and reliable transportation of different types of microtitre
plates, both in landscape and portrait format. If you need to automate assay screening, look no further.
The Microlab
®
SWAP offers a wide range of applications for your high throughput screening and
secondary screening. The flexibility allows easy integration of pipetting robots, as well as plate readers,
washers and storage equipment from a variety of manufacturers. The instrument is available in two
lengths - 420mm and 1400mm.
■
High-speed plate handling with increased efficiency
■
Flexible and easy to integrate
■
Four degrees of freedom
■
Two different track sizes available
■
No plate loss during or after a power failure
■
Low noise stepper motor technology
■
Automated plate detection
■
Easy-to-use Windows-based software
■
Re-gripping in portrait and landscape
■
Easy to “teach” with SWAP teaching box
Specifications
Model SWAP 420 SWAP 1400
Dimensions (hxwxd), mm 622x233x750 622x233x1730
Weight, kg 22 33
Electrical requirements <0.8-2 A, 100-250V, 50-60Hz (both models)
Working range
X-Axis, mm 420 1400
Y-Axis, mm 310 (both models)
Z-Axis, mm 235 (both models)
Rotation, ° 270 (both models)
Payload, kg 0.5 (both models)
Resolution
X-Axis, mm/Step 0.1 (both models)
Y-Axis, mm/Step 0.1 (both models)
Z-Axis, mm/Step 0.05 (both models)
Rotation, °/Step 0.018 (both models)
Speed
X-Axis, mm/sec 2-400 (both models)
Y-Axis, mm/sec 2-500 (both models)
Z-Axis (down), mm/sec 2-160 (both models)
Z-Axis (up), mm/sec 2-110 (both models)
Rotation, °/sec 0.36-90 (both models)
Gripper, mm/sec 3-15 (both models)
Electronic box
Dimensions (hxwxd), mm 125x365x215 (both models)
Weight, kg 5 (both models)
Computer requirements Windows NT, Windows 98, 2000 or XP operating systems, including a
PS/2 Mouse, CD-ROM Drive, printer port, SVGA monitor with resolution
at least 600x800, at least 1 serial port, ~1 GB HDD and at least 32 MB
RAM (both models)
Instrument communications RS232 via Serial Port, CAN Input/Output
Firmware download without component changes using EEPROM
technology (both models)
Certifications CE, EMC, CSA, NRTL (both models)
The Standard system comprises: Microlab® SWAP 420; software; base plate; stack holder for up to 4
stacks; stacker; shelving unit.
Cat. No. Description Price
448-000 Microlab® SWAP 420 standard system* POA
* Please note that this does not include the cost of installation or drivers for incorporating 3rd party devices. Please
contact our Technical Office on 01342 826836 to discuss your requirements in detail.
For more information on options, accessories, compatible equipment and the SWAP 1400, please contact our
Technical Office on 01342 826836.
New