Specifications

Order by phone➤
01342 826836
Order on-line➤
www.ecomcat.co.uk
Order by fax➤
01342 826771
Website➤
www.jencons.co.uk
Heaters/Sealers
Microplate Equipment
652
Take a look at our latest products on www.ecomcat.co.uk
Clifton, BH-M Series, Thermuplate Block Heater
This stylish and robust stainless steel unit is specially suited for skirted or unskirted 96-well format microplates,
strips or micro tubes. This unit consists of a low profile, durable, corrosion resistant, stainless steel case with
chemically resistant wipe clean control panel. The sloping control panel features touch buttons to enter
temperature and time values. Indicators show heating, alarm, time and set point modes in use.
■
Clearly visible LED display (time or temperature display, digital PID control, menu driven data entry)
■
Time and temperature settings retained after power off
■
Control options: temperature control only, temperature and time, process – two temperature set points
■
3 year warranty
Specification
Cat. No. Description Price
357-101 BH-1M Thermuplate block heater POA
1. @ 60°C. 2. 120V available please enquire for details on 01342 826836.
Thermobond
®
, Heat Sealer
The Thermobond heat sealer is designed to seal polypropylene and polystyrene tubes, microtitre plates,
deepwell plates and strips with a specially prepared film or foil, to prevent sample evaporation or leakage
during storage and transportation.
Heat is applied to the surface of the film creating a fine melt of the coating to the surface of a tube or
microplate being sealed. The process is adhesive free and no heat is transferred to the sample. A variety
of interchangeable, metal blocks and spacer plates are available to cover virtually every application.
■
Prevents sample loss, evaporation and eliminates risk of cross contamination
■
Rugged construction to ensure sample holders remain perfectly flat for even, consistent sealing
■
PTFE coated heater plate allows easy removal of any surface build-up
Specification
Cat. No. Description Price
448-068 Thermobond heat sealer supplied with 2 spacers, 1 locator to accommodate POA
deepwell microtitre plates, mains lead and instructions
Optional mounting blocks
Cat. No. Description Price
448-248 Thin wall 96-well PCR plates. Accepts plates of all well shapes and sizes POA
448-069 96x0.2ml tube block for single, 8 and 12 strip tubes (without caps) POA
448-070 Flat block for rigid & semi-rigid microplates, (24-, 48-, 96-, 192-, 384-well plates) POA
Sealing films and foils
Cat. No. Description Pack Price
448-071 Clear film for polypropylene
1
25 POA
448-072 Plastic coated metal foil for polypropylene
2
25 POA
448-073 Plastic coated metal foil for polystyrene
2
25 POA
1. Temperature range -80°C to +95°C 2. Temperature range -80°C to +110°C
Temperature of heating plate 175°C
Temperature stability ±5°C
Temperature sensor Thermostat
Over temperature cut-out 180°C
Warm-up time (from ambient) Within 15mins
Heater type Cartridge
Dimensions (wxdxh), mm 220x370x130
Power 230V, 50Hz
Weight, kg 5
Temperature
Display resolution, °C 0.1
Range, °C amb+5 to +100
Sensitivity, °C
1
±0.1
Uniformity well to well, °C
1
±0.1
Over temperature alarm +4°C, with heater
cut off, indication
Timer
Display resolution, mins 1
Settings, mins. variable 0–999
Time cycle activated @
set point 2
Cycle end audible buzzer
and “end” message
Heater, W 250
Heating well dims. 140x50x72
(wxdxh), mm
Capacity, options 12x thin wall strips 8x0.2ml
micro tubes ‘v‘ well, 1x96
‘v‘ well, microplate 0.2ml –
skirted full or mini, 1x96
‘v‘ well, microplate 0.2ml –
unskirted, 96x thin wall
0.2ml micro tubes ‘v‘ well
Overall dims. 200x295x95
(wxdxh), mm
Voltage, V 230
2
448-068
New
357-101
New