Specifications

Order by phone➤
01342 826836
Order on-line➤
www.ecomcat.co.uk
Order by fax➤
01342 826771
Website➤
www.jencons.co.uk
Microplate Equipment
Readers
Take a look at our latest products on www.ecomcat.co.uk
635
448-048
Jencons, Optica Microplate
Reader
The Optica microplate reader is an 8 channel
photometer for 96-well microplates. It can be
operated using either the onboard software via
the 17 key membrane and back lit LCD or through
a PC (software required, but not supplied). Results
can be printed utilising a dot-matrix printer
connected directly to the Optica or to any printer
that is connected to the PC.
The Optica software lets you run up to 10
different assays per session with plates containing
up to 12 standards and 12 controls. Assays can
be configured and saved onto the hard disc ready
for future use. The software also enables the
processing of a qualitative or a quantitative assay
with qualitative interpretation which is visualised
in a graph. Individual data cards can be generated
for each patient and all test results can be saved
or printed out.
■
Two optical filters built in as standard
■
Optional addition of two more filters
■
Full onboard control or control via PC
(accessory software required)
■
Accommodates all 96-well plate types
■
8 independent channels
■
Quiet and reliable
■
Minimal footprint
Specification
Reading principle 8 channel mono or biochromatic reading
Light source 8 independent tungsten bulbs
Detectors 8 silicon photodiodes
Measuring range 450nm to 630nm with filters supplied
405nm to 750nm with optional filters
Measuring times 16 seconds – full plate monochromatic
32 seconds – full plate biochromatic
Accuracy ±1% from 0.000 to 1.500 OD
±2% from 1.500 to 3.000 OD
Result curves Direct plotting point to point, linear regression
and 4 parameter (log-logit)
Result calculation modes OD, direct or calculated cut-off, single calibrator,
programmable curves from 2 to 12 point
Plate shaking Timed linear shaking
Interfaces User interface: 2x20 character LCD and
17 key membrane switch panel
Printer interface: Printer port for a dot-matrix printer
PC interface: RS232 to PC using Windows™ 98/XP/ NT/2K
Power supply 110/230V AC, 50-60Hz
Dimensions (wxdxh), mm 200x577x240
Weight, kg 8.2
Cat. No. Description Price
448-048 Optica microplate reader with two filters (450-630nm) POA
448-049 PC software supplied with RS232 cable. POA
Suitable for PC using Windows™ 98/XP/NT/2K
Please specify power supply when ordering, so that your reader is supplied with the correct mains lead. For details on
other filters and spare filters please contact our Technical Office on 01342 826836.
New
448-048
New