User Manual

17
DX-HTVMM1703-C
www.dynexproducts.com
STEP 8 - Adjust the mount arm and tilt angles
You’ll need
1 To adjust the arms’ tension (to make the arm easier or harder to move), loosen or tighten the tension screws with an
Allen wrench.
2 To rotate your TV left or right, hold the sides of your TV, then push one side while pulling the other side.
3 To tilt of your TV up or down, hold the top and bottom of your TV, then tilt your TV forward or backward.
Allen wrench
Allen wrench
Tension screw
Tension
screw
-8° ~ 12°
45°
TV
DX-HTVMM1703-C_20-0199_INSTALL_MAN_V6_EN_FR.fm Page 17 Tuesday, September 29, 2020 5:36 PM