User Manual

12
Full Motion Mount for TVs 47" - 84" Support de montage articulé pour téléviseurs de 47 à 84 po
www.dynexproducts.com
4 Align the wall plate on the wall mount with the pilot holes, insert the lag bolts (B1) through the lag bolt washers (B3),
then through the holes in the wall plate. Make sure that the wall plate is level. Tighten the lag bolts with a socket
wrench only until they are firm against the wall plate.
CAUTION: DO NOT over-tighten the lag bolts (B1).
B3
B1
Wood stud
Magnetic removable
bubble level
DX-HTVMM1703-C_20-0199_INSTALL_MAN_V6_EN_FR.fm Page 12 Tuesday, September 29, 2020 5:36 PM