Service manual

Trinix NXT — Installation and Service Manual 389
TRX-VI-33100 Module
Press: 'M' to move/copy channel configuration.
Press: 'Z' to set ALL channels to factory defaults.
Press 'ESC' to return to Main Menu.
When an input (channel) is selected, the display will show the values for
that particular channel:
Figure 274. Timing setup menu for one channel (NTSC shown).
Timing -
--------------------------------------------------------------------------------
Reference - Input 0: Line Rate: 525 Line Type: NTSC (M, J)
================================================================================
Selected - Input 0: Line Rate: 525 Line Type: NTSC (M, J)
--------------------------------------------------------------------------------
Horizontal Timing:
0.0 to 857.5 pixels (0.5 steps) for 525
0.0 to 863.5 pixels (0.5 steps) for 625
--------------------------------------------------------------------------------
+---------------------------- Channel Line Rate ----------+
| |
| +-------------------- Horizontal (pixels) |
+-------+--------------------------------------------------------------------+--
0, 000.0 525
To Decrement/Increment Horizontal position press: 'F'/'G'.
Press: 'ESC' to ABORT changes and return to the previous Menu.
Press: 'Enter' to ACCEPT changes and select a different channel.
Press: 'Y' to revert back to last settings.
Press: 'Z' to set THIS channel to factory defaults.
5.) Setup Picture Enhancer
Picture enhancement selections are summarized in Table 120.
The actual menus are shown in Figure 275 on page 389.
Table 120. Picture Enhancement Selections.
Figure 275. Picture enhancer menu for NTSC, showing setup for all 16 inputs. PAL display is
similar. (Only Input 0 is connected in this example.).
Picture Enhancer -
--------------------------------------------------------------------------------
Reference - Input 0: Line Rate: 525 Line Type: NTSC (M, J)
================================================================================
Detail Enhancer Level:
Disabled 0
Low 1
Medium 2
High 3
--------------------------------------------------------------------------------
+---------------------------- Channel Line Rate ----------+
| |
| +-------------------- Detail Enhancer |
+-------+--------------------------------------------------------------------+--
0, 0 525
1, 0 N/A
2, 0 N/A
3, 0 N/A
4, 0 N/A
Processing
Function
Type
Default
Range/Choices
Resolution
Detail Enhancer Level 0
0 = Disabled
1 = Low
2 = Medium
3 = High