Installation manual

26 TRINIX — Release Notes
Version 3.2.0
Figure 16. The Broadlinx: Updating Firmware Status Window - Update Completed
The Broadlinx web page will then indicate “Post Completed.”
4. Navigate to the Firmware Management page. The Restart button will
now appear near the bottom of the page. (The display may vary from
the example that is shown in Figure 17.)
Figure 17. The Restart Button on the Firmware Management Screen
The cards must be restarted to use the new firmware.
5. Click the Restart button.
The following Caution pop-up window will then appear:
Click this button
The Restart button