Installation manual

24 TRINIX — Release Notes
Version 3.2.0
The cursor will “blink” when the update process is completed. Press the
Enter key on the keyboard to have the Command prompt appear. This step
will let you know that this portion of the update is completed.
Activating the Software for Both Broadlinx Boards
Navigate to the Broadlinx Web page, using Internet Explorer, to complete
updating the firmware. The Broadlinx Firmware Management page will
display the following information:
• The possible types of PC boards
• The version of the Broadlinx software that is presently associated
with each type of board that is installed
• The versions of top-level software packages that are present in the
Broadlinx board
• The compatibility Status of these software elements.
An example of this table is shown in Figure 6 on page 18.
Some of the Status lights, in the Status column of the Broadlinx Firmware
Management page, will be red following an installation using a Compact
Flash card. This indicates that the software that is currently running in the
module is different (or older) than the software that was just installed. The
new software should be activated by following the instructions provided
below.
Figure 13. The Firmware Management Screen
The installed version of
Broadlinx
Older firmware
The Activate Button