Installation manual

20 TRINIX — Release Notes
Version 3.2.0
Note If the window is accidentally closed, you can return to it by navigating to the
home page of the Broadlinx card. The rest of the Broadlinx pages are not
available while the update is in progress.
When the progress bars reach 100%, a “finished firmware update”
message will appear.
3. Click the Click here to close this window button (Figure 9 on page 20).
Figure 9. The Broadlinx: Updating Firmware Status Window - Update Completed
The Broadlinx web page will then indicate “Post Completed.”
4. Navigate to the Firmware Management page. The Restart button will
now appear near the bottom of the page. (The display may vary from
the example that is shown in Figure 10.)
Click this button