Installation manual

18 TRINIX — Release Notes
Version 3.2.0
The cursor will “blink” when the update process is completed. Press the
Enter key on the keyboard to have the Command prompt appear. This step
will let you know that this portion of the update is completed.
5. Type: sendLoader 10,<frame #>,<NR Slot #>
For Example: sendLoader 10,0,0
Step 5 is used to update the NR-33000 (Broadlinx) board. The command in
Step 4 updates other boards but the Broadlinx board.
Using the Web Page
Navigate to the Broadlinx Web page to complete updating the firmware.
The Broadlinx Firmware Management page displays the following:
• The possible types of PC boards
• The version of the Broadlinx software that is presently associated
with each type of board that is installed
• The versions of top-level software packages that are present in the
Broadlinx board
• The compatibility Status of these software elements.
An example of this table is shown in the figure below (Figure 6).
Figure 6. The Firmware Management Screen
The installed version of
Broadlinx
Older firmware